BioHorizons® ANALOGS

1. External hex

Fixture level analogs (Fig.1) are color coded according to the implant platform diameter, yellow (3.5/3.7mm), green (4.0/4.2mm), blue (5.0/5.2mm) and purple (6.0/6.2mm). The external hex dimensions are machined to different dimensions and the analogs are not interchangeable from platform diameter to platform diameter.

Fig. 1

2. Internal and Tapered Internal hex

Fixture level analogs (Fig.2) are color coded according to implant platform diameter, yellow (3.5mm), green (4.5mm) and blue (5.7mm). The internal hex platform dimensions are machined to different dimensions and the analogs are not interchangeable from platform diameter to platform diameter.

Fig. 2

3. Single-stage implants

Fixture level analogs (Fig.3) are color coded according to implant platform diameter, yellow (3.5mm), green (4.5mm) and blue (5.7mm). The actual implant platform diameters are 4.5mm (yellow), 5.5mm (green) and 6.7mm (blue). The internal hex platform dimensions are machined to different dimensions and the analogs are not interchangeable from platform diameter to platform diameter.

Fig. 3

4. Abutment for Screw

Abutment for Screw analogs (Fig.4) are universal and work with external hex, internal, tapered internal and single-stage implants regardless of the original implant/abutment interface platform diameter. Although the analogs are machined with a external hex, the hex is not engaged with the actual restoration.

Fig. 4

5. Simple-solution

Simple-solution abutment level analogs are Internal, Tapered internal and Single-stage implant compatible. Platform diameters are color coded yellow (3.5mm), green (4.5mm) and blue (5.7mm). Each analog is produced in two different abutment heights of 4mm (Fig.5, left) and 5.5mm (Fig.5, right). The abutment analog dimensions are machined to different dimensions and the analogs are not interchangeable from platform diameter to platform diameter.

Fig. 5

6. Laser-Look 3.0

Laser-Look 3.0 analogs (Fig.6, left) are not compatible with any of the Internal or Tapered internal analogs.

7. One-piece 3.0

The One-piece 3.0 analog (Fig.6, middle) can only be utilized if the actual abutment portion of the implant has not been modified by the dentist before impression taking.

Fig. 6

8. Over denture

Over denture analogs (Fig.6, right) are sold as a set of two analogs.

All images courtesy of BioHorizons®