BioHorizons® SURGICAL TOOLS

1. Universal

Torque Wrench
Two prosthetic torque wrenches are available from BioHorizons®. A single torque setting (30Ncm) "break" style wrench (catalog # 300-430) with a square tool bit receptacle and a multi torque setting (15, 20, 25, 30, 35, 40, 45, 50, 60Ncm) wrench (catalog # ATW) also with a square tool bit receptacle.

Hex Driver, 0.050 (1.25mm)
Hex drivers intended for torque wrenches are offered in two lengths short (catalog # 300-350) and long (catalog # 300-351). Latch type drivers for surgical motors are also produced in two lengths, short (catalog # 134-350) and long (catalog # 134-450). A manual laboratory hex driver (catalog # 135-351) is available in one length only.

AS123 Hand Unit
The AS123 Hand Unit (catalog # 300-100) may provide improved vision and easy access to prosthetic components in posterior regions of the mouth. A 1:1 gear ratio allows for precise operation and the square tool bit receptacle works with any of the square tool bits. Operated with the hand or torque wrench. Hand wrench and drivers must be purchased separately.

Hand Driver, Ratchet and Hand Wrench Extender
The hand driver (catalog # 300-400) serves as a manual handle for any square tool bit and the AS123 Hand Unit. A extender (catalog # 300-205) may be utilized with the hand driver, torque wrenches and the AS123 Hand Unit.

2. External hex

Fixture Mount Implant Driver
The fixture mount driver is used to pick up the implant with the installed 3inOne fixture mount and drive the implant in to the osteotomy. Two platform dependent ratchet drivers are produced for the external implant system. One for the 3.5mm platform (catalog # 303-200) and one for 4.0, 5.0 and 6.0 platform (catalog # 345-200) implants. Latch type drivers are also offered for the 3.5mm platform (catalog # 133-100) and 4.0, 5.0 and 6.0 (catalog # 145-100) platform implants.

Implant Level Driver
Ratchet driven implant level drivers are used to deliver the implant in to the osteotomy site without the fixture mount. The fixture mount is removed and the driver is screwed on to the implant, engaging the external hex of the implant and the ratchet is attached to the driver. Three different platform dependent drivers are available, 3.5mm (catalog # 153-000), 4.0mm (catalog # 154-000) and 5.0/6.0mm (catalog # 155-000) platform. Each driver is color coded for platform diameter identification, yellow 3.5, green 4.0 and blue/fuchsia 5.0/6.0.

3. Tapered Internal, Internal, Single-stage

Fixture Mount Implant Driver
The fixture mount driver is used to pick up the implant with the installed 3inOne fixture mount and drive the implant in to the osteotomy. One size driver fits all three platform diameters. Two types of drivers are offered for internal indexing feature implants. The ratchet operated driver catalog number is PRA and the latch type driver catalog number is PHA.

Implant Level Driver
Ratchet driven implant level drivers are used to deliver the implant in to the osteotomy site without the fixture mount. The fixture mount is removed and the driver is engaged on to the implant and held together through friction. Two different platform dependent drivers are available, 3.5/4.5mm (catalog # SYGIDR) and 5.7mm (catalog # SBIDR) platform. The latch type driver catalog numbers for 3.5/4.5mm platform implants is SYGIDH and SBIDH for 5.7mm platform implants. Each driver is color coded for platform diameter identification, yellow/green 3.5/4.5 and blue 5.7mm.

4. Laser-Lok® 3.0

Implant Level Driver
Implant level drivers are used to deliver the implant in to the osteotomy. The driver is engaged on to the implant and held together through friction. Two different types of drivers drivers are available, a driver for the ratchet and a latch type driver for the surgical motor. The latch type driver catalog numbers is TP3IDH and the catalog number for the ratchet driver is TP3IDR.

5. One-piece 3.0

Implant Level Driver
Implant level drivers are used to deliver the implant in to the osteotomy. The driver is engaged on to the implant and held together through friction. Two different types of drivers are available, a driver for the ratchet and a latch type driver for the surgical motor. The latch type driver catalog numbers is 133-000 and the catalog number for the ratchet driver is 330-200.

6.0 Overdenture 3.0

Implant level driver
Implant level drivers are used to deliver the implant in to the osteotomy. The driver is engaged on to the implant and held together through friction. Two different types of drivers are available, a driver for the ratchet and a latch type driver for the surgical motor. The latch type driver catalog numbers is 133-000OS and the catalog number for the ratchet driver is 330-200OS.

All images courtesy of BioHorizons®