BlueSkyBio IMPLANTS

ONE-STAGE

Fig.1

ONE-STAGE implants have a straight body with an outside V thread pattern and internal octagon implant/abutment connection. All of BlueSkyBio's implants are made of grade 5 titanium and a RBM (resorbable blast media)surface roughening. The RBM surface structure is achieved through HA (hydroxylapatite) particle blasting followed by an acid wash to remove any embedded particles. A machined neck of 1.8mm separates the surface textured area from the platform of the implant. Three implant/abutment platform diameters (narrow, regular, wide) (Fig.1) are ported to several implant body diameter configurations (Fig.1) and available in several lengths. Implants are supplied with a cover screw and require a special fixture mount driver (J-driver).
Narrow platform diameter implants have a platform diameter of 4.1mm and a body diameter of 3.3mm in lengths of 10mm and 12mm or a body diameter of 4.1mm in lengths of 10mm and 12mm.
Regular platform diameter implants have a platform diameter of 4.8mm and a body diameter of 3.3mm in lengths of 10, 12 and 14mm. Or a body diameter of 4.1mm in lengths of 8, 10, 12, 14 and 16mm. An additional body diameter of 4.8mm is offered in lengths of 6, 8, 10, 12, 14 and 16mm.
Wide platform diameter implants have a platform diameter of 6.5mm and a body diameter of 4.8mm in lengths of 8, 10 and 12mm. Or a body diameter of 5.6 mm in lengths of 6, 8 and 10mm. The ONE-STAGE system is surgically and prostheticly compatible with Sraumann's® tissue level implant system.

INTERNAL HEX

Fig.3

INTERNAL HEX implants have a tapered body with an outside thread pattern and internal hex implant/abutment connection. All of BlueSkyBio's implants are made of grade 5 titanium and a RBM (resorbable blast media) surface roughening. The RBM surface structure is achieved through HA (hydroxylapatite) particle blasting followed by an acid wash to remove any embedded particles. The surface roughening extends all the way to the implant platform. Implants are supplied with a cover screw, a 3mm healing abutment and require a special fixture mount driver (J-driver). Two

Fig.4

 platforms (3.5, 4.5mm)(Fig.3) are offered in several lengths and implant body diameters. 3.5mm platform diameter implants are machined with a 3.7mm implant body in five lengths (8, 10, 11.5, 13, 16mm) (Fig.4). 4.5mm platform diameter implants are available with a 4.1mm or a 4.7mm diameter implant body in five lengths (8, 10, 11.5, 13, 16mm) (Fig.4). Both platform diameters are prosthetically compatible with a wide array of other manufacturers implants (Implant Direct Legacy I, II, III, Zimmer TSV, BioHorizon Internal, Tapered Internal).

TRILOBE

Fig.5

TRILOBE implants have a straight body, tapered apex with an outside thread pattern and internal tri lobe implant/abutment connection. All of BlueSkyBio's implants are made of grade 5 titanium and a RBM (resorbable blast media) surface roughening. The RBM surface structure is achieved through HA (hydroxylapatite) particle blasting followed by an acid wash to remove any embedded particles. TRILOBE implants are further enhanced by adding fluoride to the surface to promote osseointegration. The surface roughening extends all the way to the implant platform.

Fig.6

Implants are supplied with a cover screw, a 3mm healing abutment and require a special fixture mount driver (J-driver). Three implant/abutment platform diameters (Fig.5) are offered in several lengths. 3.5 platform diameter implants are available in three lengths (10, 13, 16mm) (Fig.6) and 4.3 platform diameter implants are offered in four lengths (8, 10, 13, 16mm). 5.0 platform diameter implants are also machined in four lengths (8, 10, 13, 16mm). NobelReplace® prosthetic components are compatible with BlueSkyBio's TRILOBE implants but BlueSkyBio's prosthetic components are not compatible with NobelReplace® implants.

All images courtesy of Blue Sky Bio.