BlueSkyBio IMPRESSION COPINGS

ONE-STAGE

Fig.1

Impression copings for ONE-STAGE implants are offered for fixture level direct and indirect impression techniques made of color coded plastic or aluminum. Abutment level impression copings are made as snap on, color coded plastic copings.
Fixture level impression copings are color coded according to the implant/abutment platform diameter (yellow narrow 4.1, red regular 4.8, gray wide 6.5) of the implant. Traditional two piece metal, engaging impression copings (Fig.1 bottom row) for the direct impression technique are part of the impression coping options. Simple one piece, engaging plastic impression copings (Fig.1 top row) snap on to the implant.
Abutment level plastic impression copings (Fig.2)  (abutment level impression) are color coded according to the implant/abutment platform diameter and abutment height. The plastic copings have a internal flat side to engage the flat side of the abutment.

Fig.2

orange (narrow platform 4.1mm, 4mm abutment height)
white (narrow platform 4.1mm, 5.5mm abutment height)
fuchsia (narrow platform 4.1mm, 7mm abutment height)
yellow (regular platform 4.8mm, 4mm abutment height)
gray (regular platform 4.8mm, 5.5mm abutment height)
blue (regular platform 4.8, 7mm abutment height)
green (wide platform 6.5mm, 4mm abutment height)
brown (wide platform 6.5mm, 5.5mm abutment height)
 

INTERNAL HEX

Fig.3

Fixture level impression copings (Fig.3) are not color coded according to the implant/abutment platform diameter (3.5, 4.5mm) of the implant. Traditional two piece metal, engaging impression copings for the direct and indirect impression technique share the same coping design but the fixation screw length differs.

TRILOBE

Fig.4

No dedicated fixture level impression copings are available for TRILOBE implants. The implant/abutment platform diameter (3.5 purple, 4.3 yellow, 5.0mm blue) specific UCLA abutment (Fig.4 top row) is intended to be used as a fixture level impression coping (indirect impression) due to the unique design of the plastic cylinder pressed on to the titanium base. A separate prepable conical abutment (Fig.4 bottom row) may be used as a impression coping alternative.

Fig.5

Abutment level plastic impression copings (Fig.5) are offered for the KISS abutment line of products. Impression copings (abutment level impression)  for 3.5mm and 4.3mm platform KISS abutments share the same red colored impression coping components, only the 5.0mm platform KISS abutment has its own colored (brown) impression component. KISS abutments are offered as kits including the screw, metal analog, two resin analogs, impression coping, engaging and non-engaging waxing sleeves and temporary sleeve. Or as impression kits containing two resin analogs, impression coping, engaging and non-engaging waxing sleeves and temporary sleeve.

All images courtesy of Blue Sky Bio.