Implant Direct™ HEALING ABUTMENTS

Legacy™ (I, II, III)

Healing abutments for all four implant/abutment platforms (3.0 , 3.5 , 4.5 , 5.7mm) are machined as a unibody component, integrating the screw and the abutment body in to one singular piece. The healing abutments are not color coded for platform identification and require a 0.50' (1.25mm) hex driver. Each platform diameter healing abutment is offered in two collar heights of 3mm and 5mm. 3.0mm platform abutments have a emergence profile of 3.8mm, 3.5mm platform abutments have a emergence profile of 4.8mm, 4.5mm platform abutments have a 5.8mm emergence and 5.7mm platform abutments have emergence profile of 6.8mm.

ReActive®, RePlant®, RePlus®

Healing abutments for all four implant/abutment platforms (3.5 , 4.3 , 5.0 , 6.0mm) are machined as a unibody component, integrating the screw and the abutment body in to one singular piece. Two emergence profiles in two collar heights (3mm, 5mm) are available for each platform.
Narrow emergence profile healing abutments are color coded in compliance with the "Re" system wide platform coding scheme and have the same emergence profile as the implant platform diameter. A Dual-Grip™ driver socket allows a Nobel Biocare Unigrip and a 0.50' (1.25mm) hex driver to screw the abutment in place. Healing abutments with a extended emergence profile are not color coded and utilize a 0.50' (1.25mm) hex driver only. 3.5 platform abutments extend to 4.6mm, 4.3 platform abutments extend to 5.6mm, 5.0 to 6.1mm and 6.0 platform abutments extend to 6.8mm.

SwishPlant™ (SwissPlant™)

Healing abutments for all three implant/abutment platforms (3.7 , 4.8 , 6.5mm) are machined as a unibody component, integrating the screw and the abutment body in to one singular piece. The abutments are not color coded and require a 0.50' (1.25mm) hex driver. Two collar heights (2mm, 3mm) for each platform and several platform dependent emergence profiles are offered.

Spectra-System®

ScrewPlant® and ScrewPlus® healing abutments for all four implant/abutment platforms (3.7 , 4.7 , 5.7 , 6.5mm) are machined as a unibody component, integrating the screw and the abutment body in to one singular piece. The abutments are not color coded and require a 0.50' (1.25mm) hex driver. Two collar heights (3mm, 5mm) for each platform and several platform dependent emergence profiles are offered. Narrow emergence profile abutments increase in diameter 0.1mm and regular emergence profile abutments are machined 1.1mm wider than the actual platform diameter with the exception of 5.7 and 6.5mm platform diameter healing abutments. 5.7 and 6.5mm regular healing abutments extend 0.9mm from their respective platform diameters.

All images courtesy of Implant Direct.