Implant Direct IMPLANTS
Legacy (I, II, III)
Fig. 1
Legacy implants are available with a soluble blast media (SBM)
surface treatment or a hydroxylapatite (HA) plasma sprayed surface
coating. The SBM surface is sand blasted with hydroxylapatite particles
and acid washed to eliminate any embedded HA particles. Four color coded
(3.0 blue, 3.5 green, 4.5 purple, 5.7 yellow) Prosthetic platform
diameters are offered depending on the Legacy version. 3.0mm
platform diameter implants are only available for the Legacy III
product line. The implant/abutment indexing feature is a internal hexagon
of prosthetic platform diameter
Fig. 2
dependent dimensions. All Legacy
implants are offered in five lengths of 8, 10, 11.5, 13, and 16mm,
packaged with a two component cover screw/extender. The extender attaches
to the cover screw, converting the cover screw in to a complete 2mm height
healing abutment. All Implant Direct implants are made of grade 5
titanium.
Legacy I
Legacy I implants are machined with a tapered
geometry and a shallow outside "V" thread pattern with micro threads at
the coronal top third. Three implant diameters are produced
in diameters of 3.7, 4.7 and 5.7mm. Each implant is packaged
with a pre mounted plastic fixture mount/carrier and a cover screw/extender.
The plastic fixture mount/carrier is only to be used without tools or torque
wrench. A separate fixture driver is required after removal of the plastic
fixture mount to completely seat the implant in to the osteotomy site.
Legacy II
Legacy II implants are machined with a tapered
geometry but straight coronal top third. A aggressively deeper thread pattern
towards the apical portion of the implant and micro threads at the top
third of the implant are a signature feature of Legacy II product
group. 3.5mm prosthetic platform diameter implants are available in two
implant body diameters of 3.7 and 4.2mm. 4.5mm prosthetic platform diameter
implants are machined with a 4.7mm body diameter only. 5.7mm prosthetic
platform diameter implants are produced in two body diameters of 5.7 and
7mm whereby the 7mm body diameter implant tapers aggressively toward the
apical. Each implant is packaged with a pre mounted fixture mount that
can be utilized as a impression coping and temporary abutment after
modification.
Legacy III
Legacy™ III implants are machined with a tapered
geometry but straight coronal top third. A aggressively deeper buttress
thread pattern towards the apical portion of the implant and micro threads
at the top third of the implant are a signature feature of Legacy III
product group. 3.0 prosthetic platform diameter implants are provided with
only one body diameter of 3.2mm. 3.5mm prosthetic platform diameter
implants are available in two implant body diameters of 3.7 and 4.2mm.
4.5mm prosthetic platform diameter implants are machined with a 4.7mm and
a 5.2mm body diameter. 5.7mm prosthetic platform diameter implants are
produced in one body diameter of 5.7mm. Each implant is packaged with a
pre mounted fixture mount that can be utilized as a impression coping and
temporary abutment after modification.
ReActive®, RePlant®, RePlus®
Fig. 3
Implants in this system group are available with a soluble blast media
(SBM) surface treatment or a hydroxylapatite (HA) plasma sprayed surface
coating. The SBM surface is sand blasted with hydroxylapatite particles
and acid washed to eliminate any embedded HA particles. Four color coded
(3.5 purple, 4.3 yellow, 5.0 blue, 6.0 green) Prosthetic platform
diameters are offered depending on the "Re" system version. 6.0mm
platform diameter implants are only available for the RePlant®
product line. The implant/abutment indexing feature (Fig.3) is a internal tri lobe
of prosthetic platform diameter dependent dimensions. All "Re" system
implants are offered in five lengths of 8, 10, 11.5, 13, and 16mm,
packaged with a cover screw. All Implant Direct implants are made
of grade 5 titanium.
ReActive®
ReActive® implants are machined with a tapered
geometry and a more aggressive outside "V" thread pattern with micro
threads at the coronal top third. Four implant diameters are produced
in body diameters of 3.7, 4.2, 4.7 and 5.7mm. The 3.7mm and 4.2mm body
diameter implant have a 3.5mm prosthetic platform and the 4.7mm body
diameter has a 4.3mm platform, 5.7mm body diameter implants are machined
with a 5.0 platform. Each implant is packaged with a pre mounted fixture
mount that can be utilized as a impression coping and final abutment after
modification. A cover screw completes the implant kit.
RePlant®
RePlant® implants are machined with a straight
geometry and taper towards the apical of the implant beginning at the
half way point of the implant body. Shallow outside "V" threads with micro
threads at the coronal top third. Four implant body diameters are produced
in diameters of 3.5, 4.3, 5.0 and 6.0mm, matching the respective prosthetic
platform diameters. Each implant is packaged with a pre mounted fixture
mount that can be utilized as a impression coping and temporary abutment
after modification. A cover screw completes the implant kit.
RePlus®
RePlus® implants are machined with a slightly tapered
geometry and a shallow outside "V" thread pattern with micro
threads at the coronal top third. Four implant diameters are produced
in body diameters of 3.7, 4.2, 4.7 and 5.7mm. The 3.7mm and 4.2mm body
diameter implant have a 3.5mm prosthetic platform and the 4.7mm body
diameter has a 4.3mm platform, 5.7mm body diameter implants are machined
with a 5.0 platform. Each implant is packaged with a pre mounted fixture
mount that can be utilized as a impression coping and final abutment
after modification. A cover screw and temporary coping complete the
implant kit.
SwishPlant (SwissPlant)
SwishPlant
SwishPlant implants are intended for a one stage surgical protocol
and are machined with a outside bevel prosthetic platform. Implants in
this system group are available with a soluble blast media (SBM) surface
treatment only. The body geometry is slightly tapered with two thread patterns on the implant body. Micro
threads are incorporated at the top portion of the implant and deeper, more
aggressive threads toward the apical of the implant. Six implant lengths
(6, 8, 10, 12, 14, 16mm) in four body diameters (3.3, 4.1, 4.8, 5.7mm) and
three prosthetic platforms (3.7, 4.8, 6.5mm) comprise the SwishPlant
product line. 3.3mm body diameter implants have a 3.7mm prosthetic platform
and 4.8mm prosthetic platform implants are offered in two body diameters
of 4.1mm and 4.8mm. The 6.5mm prosthetic platform is
Fig. 4
available in two body
diameters of 4.8mm and 5.7mm. Prosthetic platforms are color coded light
blue (3.7mm), brown (4.8mm) and blue (6.5mm). Indexing of the prosthetic
components is achieved through a internal double hex (Fig.4, 3.7mm platform) or a
internal octagon/quadrigon (Fig.4, 4.8, 6.5mm platform). Each implant is packaged with
a already mounted fixture mount that can be utilized as a impression coping
and final abutment after modification. A temporary plastic coping and a two
component cover screw/extender complete the implant kit.
Spectra-System®
Fig. 5
The Spectra-System® is a catch all system with a wide selection of
diverse design concepts. Traditional two component (implant, prosthetics)
and one piece designs provide a multitude of options. Implants are produced
with a tapered body geometry, micro threads toward the coronal aspect of the
implant and regular threads toward the apical section of the implant. Two
component implants are offered with a soluble blast media (SBM) surface
treatment or a hydroxylapatite (HA) plasma sprayed surface coating. The
SBM surface is sand blasted with hydroxylapatite particles and acid
washed to eliminate any embedded HA particles. One piece designs are only
available with the SBM surface treatment.
ScrewPlant®
ScrewPlant®
Five implant lengths (8, 10, 11.5, 13, 16mm) in three body diameters
(3.7, 4.7, 5.7mm) and three matching prosthetic platforms (3.7, 4.7, 5.7mm)
embody the ScrewPlant® group. Platform diameters are color coded
green (3.7mm), purple (4.7mm), yellow (5.7mm) and the implant/abutment
indexing feature is a internal hex of platform dependent dimensions (Fig.5).
Individual implant kits contain a pre mounted fixture mount that can also
be utilized as a impression coping and final abutment after modification.
A temporary plastic coping and a two component cover screw/extender complete
the implant kit.
ScrewPlus®
ScrewPlus®
Five implant lengths (8, 10, 11.5, 13, 16mm) in three body diameters
(3.7, 4.7, 5.7mm) and four prosthetic platforms (3.7, 4.7, 5.7, 6.5mm)
embody the ScrewPlus® group. Platform diameters are color coded
green (3.7mm), purple (4.7mm), yellow (5.7mm), blue (6.5mm) and the
implant/abutment indexing feature is a internal hex of platform dependent
dimensions (Fig.5). The 3.7mm platform implants have a 3.7mm body diameter, 4.7mm
platform implants have a 3.7mm body diameter, 5.7mm platform implants have
a 4.7mm body diameter and 6.5mm platform implants have a 5.7mm body diameter.
A polished collar of 2mm separates the platform from the SBM surface treated
area of the implant. Individual implant kits contain a pre mounted fixture
mount that can also be utilized as a impression coping and final abutment
after modification. A temporary plastic coping and a two component cover
screw/extender complete the implant kit.
ScrewDirect®
ScrewDirect®
Three implant lengths (10, 13, 16mm) in four body diameters
(3.0, 3.7, 4.7, 5.7mm) and four prosthetic platforms (3.7, 4.7, 5.7, 6.5mm)
embody the ScrewDirect® group. Platform diameters are color coded
green (3.7mm), purple (4.7mm), yellow (5.7mm), blue (6.5mm) although the
actual implant and attached abutment are not color coded, only the
included implant carrier/impression coping is color coded. As mentioned
above, the implant and abutment are machined as one piece and can not be
separated. The implant is only available with a SBM surface treatment and
packaged with a snap on, plastic temporary coping and the pre mounted
carrier/impression coping. A dedicated driver is necessary to insert the
implant in to the osteotomy site.
ScrewRedirect
ScrewRedirect
Two implant lengths (13, 16mm) in three body diameters (3.7, 4.7, 5.7mm)
and three prosthetic platforms (4.7, 5.7, 6.5mm) embody the ScrewRedirect
group. This implant/abutment combination is machined as a one piece unit
and a 12° angled abutment portion. A slightly
tapered body geometry and shallow threads are key features of this implant
with micro threads at the coronal section. The kit includes a carrier
but requires a separate driver to insert the implant in to the osteotomy
site.
Screwindirect®
Screwindirect®
Four implant lengths (8, 10, 13, 16mm) in four body diameters (3.0, 3.7, 4.7, 5.7mm)
and one prosthetic platform (5.0mm) embody the Screwindirect® group.
This implant was designed for multi unit screw retained bridges and bar
restorations due to the integrated multi unit abutment. A slightly
tapered body geometry and shallow threads are key features of this implant
with micro threads at the coronal section. The kit includes a yellow plastic
carrier/impression coping, snap on plastic protective cap and prosthetic
platform extender. A separate driver to insert the implant completely in
to the osteotomy site is required.
GoDirect
GoDirect
Four implant lengths (8, 10, 11.5, 13mm) in three body diameters (3.0, 3.7, 4.7mm)
embody the GoDirect group. This implant was designed for overdenture
applications due to the integrated GPS (Locator® clone) abutment.
A slightly tapered body geometry and shallow threads are key features of
this implant with micro threads at the coronal section. The kit includes
a black plastic carrier/impression coping and snap on plastic protective cap.
A separate driver to insert the implant completely in to the osteotomy
site is required.
All images courtesy of Implant Direct.