Implant Direct IMPRESSION COPINGS
Legacy (I, II, III)
Fig. 1
Fixture level impression copings are offered for the
indirect (Fig.1, closed tray)
and direct (Fig.2, open
tray) impression technique. The impression copings are color coded to
indicate the implant/abutment interface platform diameter. Blue
corresponds to the 3.0mm platform, green 3.5mm, fuchsia
4.5mm and yellow coordinates with the 5.7mm platform.
Direct
impression copings are furnished with silver colored screws
requiring a 0.50' (1.25mm) hex driver. 3.5 platform fixation screws fit
only the 3.5mm platform impression coping, whereas the 4.3, 5.0 and 6.0
fixation screws are interchangeable. are machined with the same coping
body geometry and differ only in regards to
Fig. 2
the applicable fixation screw. Indirect
impression coping fixation screws are short and direct impression coping
fixation screws are long, extending from the coping body. The fixation
screws require a 0.05' (1.25mm) hex driver. 3.0 platform diameter fixation
screws are colored the same blue color as the corresponding impression
coping while 3.5, 4.5 and 5.7 platform fixation screws are silver in color.
Fig. 3
Abutment level impressions
for straight abutments are carried out with color coded plastic snap on
impression copings (Fig.3). The color coding of abutment level impression
copings does not follow the same platform
dependent color scheme as direct and indirect impression copings.
Legacy II and III implants are packaged with a multi purpose
abutment (fixture mount, temporary/final abutment) ready to
be utilized as a impression coping, color coded in compliance with the
implant/abutment platform color identification system.
Authors note: Legacy II and III implants are sold with
a multi purpose abutment. This abutment serves as a fixture mount,
impression coping and final abutment.
ReActive®, RePlant®, RePlus®
Fig. 4
Fixture level impression copings are offered for the
direct (Fig.5, open tray)
and indirect (Fig.4, closed
tray) impression technique. The impression copings are color coded to
indicate the implant/abutment interface platform
diameter. fuchsia corresponds to the 3.5mm platform, yellow 4.3mm, blue
5.0mm and green coordinates with the 6.0mm platform.
Indirect impression copings are supplied with a black
Dual-Grip fixation screw and can be serviced with a Nobel
Fig. 5
Biocare Unigrip driver
and a 0.50' (1.25mm) hex driver. 3.5 platform fixation screws fit only
the 3.5mm platform impression coping, whereas the 4.3, 5.0 and 6.0
fixation screws are interchangeable. Direct impression copings (Fig.5)
are furnished with silver colored screws requiring a 0.50' (1.25mm) hex
driver. 3.5 platform fixation screws fit only the 3.5mm platform
impression coping, whereas the 4.3, 5.0 and 6.0
fixation screws are interchangeable.
Fig. 6
Abutment level impressions
for straight abutments are carried out with color coded plastic snap on
impression copings (Fig.6). The color coding of abutment level impression
copings does not follow the same platform
dependent color scheme as direct and indirect impression copings."Re"
type implants are packaged with a multi purpose abutment
(fixture mount, temporary/final abutment) ready to be utilized
as a impression coping, color coded in compliance with the existing
implant/abutment platform color
identification system.
Authors note: ReActive®, RePlant® and
RePlus® implants are sold with a multi purpose abutment. This abutment
serves as a fixture mount, impression coping and final abutment.
SwishPlant (SwissPlant)
Fig. 7
Fixture level impression copings are offered for the
direct (open tray)
and indirect (closed tray)
impression technique. The impression copings are color coded to indicate
the implant/abutment interface platform diameter. Light blue corresponds
to the 3.7mm platform, brown 4.8mm and dark blue coordinates with the
6.5mm platform.
Fig. 8
Direct and indirect impression copings (Fig.7) are machined with the same
coping body geometry and differ only in regards to the applicable fixation
screw. Indirect impression coping fixation screws (Fig.7) are short and direct
impression coping fixation screws (Fig.8) are long, extending from the coping
body. The fixation screws require a 0.05' (1.25mm) hex driver. 3.7
platform diameter fixation screws are colored the same light blue color
as the corresponding impression coping while 4.8 and 6.5mm platform
fixation screws are silver in color.
Fig. 9
Abutment level impressions
for straight abutments are carried out with color coded plastic snap on
impression copings (Fig.9). The color coding is platform and
abutment emergence profile dependent. 3.7 platform snap on impression
copings are light blue while 4.8 platform impression copings
are brown for 4.8 emergence profile straight abutments and impression
copings for the 4.8 platform with a 5.7mm emergence profile are yellow.
6.5mm platform abutment level impression copings are dark blue.
SwishPlant/SwissPlant implants are packaged with a
multi purpose abutment (fixture mount, temporary/final abutment)
ready to be utilized as a impression coping, color coded in compliance
with the existing implant/abutment platform color identification system.
Authors note: SwischPlant implants are sold with
a multi purpose abutment. This abutment serves as a fixture mount,
impression coping and final abutment.
Spectra-System®
Fig. 10
ScrewPlant® Fixture level impression copings are
offered for the
direct (Fig.11, open tray) and
indirect (Fig.10, closed tray)
impression technique. The impression copings are color coded to indicate
the implant/abutment interface platform diameter. Green corresponds to
the 3.7mm platform, fuchsia 4.7mm and yellow coordinates with the 5.7mm
platform.
Direct and indirect impression copings are furnished with silver
colored screws requiring a 0.50' (1.25mm) hex driver.
Fig. 11
All fixation screws are interchangeable from one platform diameter to any
of the other platforms.
Abutment level impressions
for straight abutments are carried out with color coded plastic snap on
impression copings (Fig.12). The color coding follows the same platform
dependent color scheme as direct and indirect impression copings.
ScrewPlant® implants are packaged with a multi purpose abutment
(fixture mount, temporary/final abutment) ready to be utilized as a
impression coping, color coded in compliance with the existing
implant/abutment platform color identification scheme of the
ScrewPlant® system.
Fig. 12
ScrewPlus® Fixture level impression
copings are offered for the direct
(Fig.11, open tray) and indirect
(Fig.10, closed tray) impression technique. The impression copings are
color coded to indicate the implant/abutment interface platform diameter.
Green corresponds to the 3.7mm platform, fuchsia 4.7mm , yellow 5.7mm and
blue coordinates with the 6.5mm platform.
Direct and indirect impression copings are furnished with silver
colored screws requiring a 0.50' (1.25mm) hex driver. All fixation
screws are interchangeable from one platform diameter to any of the
other platforms.
Abutment level impressions
for straight abutments are carried out with color coded plastic snap on
impression copings (Fig.12). The color coding follows the same platform
dependent color scheme as direct and indirect impression copings.
ScrewPlus® implants are packaged with a multi purpose abutment
(fixture mount, temporary/final abutment) ready to be utilized as a
impression coping, color coded in compliance with the existing
implant/abutment platform color identification scheme of the
ScrewPlant® system.
ScrewDirect® implants can only be
impressed with the abutment level impression technique since the implant
and abutment are machined from one piece of titanium. Platform dependent,
color coded green 3.7, fuchsia 4.7, yellow 5.7 and blue 6.5mm) plastic
impression copings (Fig.12) are included with the implant.
ScrewRedirect implants can only be
impressed with the abutment level impression technique since the implant
and abutment are machined from one piece of titanium. No impression
copings are available for this system.
Fig. 13
Screwindirect® implants can be
impressed with the direct (Fig.13, open tray), indirect (Fig.13, closed
tray) and abutment level impression technique. A single yellow impression
coping body can be utilized for direct and indirect impressions, only the
screws differ in regards to the impression technique. Yellow
plastic impression copings (Fig.13) are utilized for the abutment level
impression technique. Any of the implant diameters are impressed with the
same diameter impression coping.
GoDirect® implants can only be impressed
with the abutment level impression technique. A universal black plastic
impression coping (Fig.13) is utilized to impress any of the implant diameters.
All images courtesy of Implant Direct.