Nobel Biocare HEALING ABUTMENTS
NobelActive
Fig. 1
Healing abutments are produced in two collar heights of 3mm (Fig.1, top
row) and 5mm (Fig.1, bottom row) for both platform diameters. Abutments
are not color coded for platform identification. The abutments are
machined as a mono block and incorporate the screw and abutment in to a
singular unit. A Unigrip driver is utilized to service the healing
abutments. NP (3.5mm) healing abutments are offered in two
emergence profile diameters of 3.6 and 5.0mm. RP/WP (4.3/4.9mm)
abutments are produced in three emergence profiles (Fig.1) of 3.6, 5.0
and 6.0mm.
Fig. 2
A specialized healing abutment, only to be used if the final restoration
will be a screw retained bridge is offered for both platform interfaces.
These abutments cover the small platform at the top of each implant.
NP bridge healing abutments (Fig.2, left) are machined with a emergence profile of
3.5mm and a collar height of 5.0mm. RP/WP bridge healing abutments (Fig.2,
right) are
also manufactured with a 5.0mm collar height and a 3.9mm emergence
profile diameter.
Brånemark System, NobelSpeedy
Fig. 3
Healing abutments are produced in two collar heights of 3mm (Fig.4, left)
and 5mm (Fig.4, right) for all three platform diameters. Abutments are
not color coded (Fig.3) for platform identification. The abutments are
machined as a mono block and incorporate the screw and abutment in to a
singular unit. A 0.035" hex driver is utilized to service the healing
abutments.
Fig. 4
WP (5.0mm) platform healing abutments are only available in one emergence
profile diameter of 6mm while all other platform diameter abutments are
machined in two emergence profile diameters. NP (3.5mm) healing abutments
are offered in two emergence profile diameters of 3.5 and 4.5mm. RP
(4.1mm) abutments are produced in emergence profiles of 4.0 (Fig.4, top
row) and 5.0mm (Fig.4, bottom row).
NobelReplace, Replace Select, NobelSpeedy Replace
Fig. 5
Healing abutments are produced in two collar heights of 3mm (Fig.6, left)
and 5mm (Fig.6, right) for all four platform diameters. Each abutment is
color coded (Fig.5) in compliance with the prevailing "Replace" color
identification scheme on top of the abutment for easy identification
fuchsia (NP, 3.5mm), yellow (RP, 4.3mm) blue (WP, 5.0mm) and green
(6.0mm). The abutments are machined as a mono block and incorporate the
screw and abutment in to a singular unit. A Unigrip driver is
utilized to service the healing abutments.
Fig. 6
6.0 platform healing abutments are only available in one emergence
profile diameter of 7mm while all other platform diameter abutments are
machined in two emergence profile diameters. NP healing abutments are
offered in two emergence profile diameters of 3.5 and 4.5mm. RP abutments
are produced in emergence profiles of 4.3 and 5.3mm. WP abutments are
produced with a choice of 5.0 and 6.0mm emergence profile diameters.
All images courtesy of
Nobel Biocare