Zimmer® HEALING ABUTMENTS

Tapered Screw-Vent® (TSV), Screw-Vent®

Fig. 1

Healing abutments are machined as single entity, combining the screw and healing abutment body in to a singular unit. Three possible abutment heights of 3, 5, and 7mm (Fig.1) in several emergence profiles (Fig.2) are offered. 3.5mm platform diameter healing abutments with zero and 5.5mm flare are produced in heights of 3 and 5mm while 4.5mm flare abutments are

Fig. 2

available in heights of 3, 5 and 7mm. 4.5mm platform diameter healing abutments with 5.5mm and 6.5mm flare are machined in heights of 3 and 5mm while 4.5mm (zero) flare abutments are offered in heights of 3, 5 and 7mm. 5.7mm platform healing abutments are executed in a single flare emergence of 6.5mm in heights of 3 and 5mm. The healing abutments may be serviced with a 0.050' hex driver.

AdVent®

The AdVent® implant system does not have dedicated healing abutments. 4.5 and 5.7mm platform (implant/abutment interface diameter) implants are packaged with a cover screw and cover screw extender. Combining the cover screw and extender will make a complete healing abutment with a total height of 2.5mm. 5.7mm platform AdVent® implant/abutment interfaces are machined to the exact same dimensions as Tapered Screw-Vent® (TSV) 5.7mm platform interfaces. This coincidence may be exploited by utilizing Tapered Screw-Vent® (TSV) healing abutments if such need arises. The healing abutments may be serviced with a 0.050' hex driver.

Tapered SwissPlus®, SwissPlus®

Tapered SwissPlus® and SwissPlus® implants are prepackaged with a 2mm height mono block (combining the healing abutment body and screw in to a singular entity) healing abutment. 3.8mm platform healing abutments are offered in two additional heights of 1 and 3mm with a emergence profile diameter of 4.6mm. 4.8mm platform healing abutments are produced in heights of 1, 2 and 3mm with a emergence profile of 5.2mm while 6.0mm emergence profile healing abutments are offered in two heights of 2 and 3mm. The healing abutments may be serviced with a 0.050' hex driver.