Zimmer® SCREWS

Tapered Screw-Vent® (TSV), Screw-Vent®

Fig. 1

Titanium contoured Hex-Lock® final abutment screws are included with each abutment purchased. Straight abutments utilize catalog # MHLAS (Fig.1, left) and angled abutment screws are designated catalog # AH20S (Fig. 1, right). Bulk titanium Hex-Lock® abutment screws follow the same catalog number designation as titanium contoured Hex-Lock® final abutment screws. Short Hex-Lock® titanium abutments use Catalog number MHLAS exclusively.

Zirconia abutment final screws utilize catalog number AH20S regardless of platform diameter and straight or angled abutment configuration.

UCLA's utilize final screw catalog number MHLAS regardless of platform diameter and engaging or non engaging configuration.

Torque and driver

AdVent®

4.5mm platform straight titanium abutments are pre packaged with final screw catalog number AVHLS while 20 degree titanium angled abutments are packaged with a final screw catalog number AVH20S. Since 5.7mm platform AdVent® implants are restored with prosthetic components from the 5.7mm platform Tapered Screw-Vent® (TSV) and Screw-Vent® product group, pertinent final screw abutment catalog numbers correspond to applicable abutments from the Tapered Screw-Vent® (TSV) and Screw-Vent® product group.

4.5mm platform UCLA's utilize final screw catalog number AVHLS. Since 5.7mm platform AdVent® implants are restored with prosthetic components from the 5.7mm platform Tapered Screw-Vent® (TSV) and Screw-Vent® product group, pertinent final screw abutment catalog numbers correspond to applicable abutments from the Tapered Screw-Vent® (TSV) and Screw-Vent® product group.

Tapered SwissPlus®, SwissPlus®

Straight titanium 3.8mm platform abutments utilize catalog number MHLAS while two component (abutment and screw) 4.8mm platform straight titanium abutments use a final screw catalog # GPCAS. 3.8mm platform 20 degree abutments are packaged with a final screw catalog number AH20S and 4.8mm platform angled abutments are packaged with a catalog number OPH20S.

Engaging 3.8mm platform UCLA abutments are packaged with a final screw catalog number MHLAS and 4.8mm platform engaging and non engaging UCLA abutments are packaged with a catalog number GPCAS.

Spline

Not covered